Operation Manual

60 FT-7800R OPERATING MANUAL
PROGRAMMING THE KEY ASSIGNMENTS
Default FT-7800R functions have been assigned to “alternate” (press and hold in) function
of the front panel’s
[
LOW
(
ACC
)]
key, as well as the Microphone’s
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
buttons’ functions (for the MH-48A6J;
[
ACC
]
/
[
P
]
/
[
P1
]
/
[
P2
]
buttons for MH-42B6JS) at the
factory. These may be changed by the user, if you wish to utilize another function on one of
these keys.
To program the function assigned to a key:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select the Menu Item to be
configured (“#27 PRG PNL,” “#28 PRG P1
(PRG ACC),” “#29 PRG P2 (PRG P),” “#30 PRG P3
(PRG P1),” or “#31 PRG P4 (PRG P2)”).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the function you wish to assign
to the button you selected in the previous step.
4. Press the
[
BAND
(
SET
)]
key to save the new setting, then rotate the DIAL knob to select
another programmable button to modify, if desired, and repeat the above steps.
5. Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
MISCELLANEOUS SETTINGS