Operation Manual

61FT-7800R OPERATING MANUAL
MISCELLANEOUS SETTINGS
PROGRAMMING THE KEY ASSIGNMENTS
For Menu #28 PRG P1
(
PRG ACC
)
, #29 PRG P2
(
PRG P
)
, #30 PRG P3
(
PRG P1
)
, #31 PRG P4
(
PRG P2
)
Function
< SQ.OF >
< TCAL >
< SSCH >
< ARTS >
< TN.FQ >
< DCSC>
< WX >
< RPTR >
< PRI >
< LOW >
< TONE >
< MHz >
< REV >
< HOME >
< BAND >
< V/M >
< SCAN >
Press the button
Disable the noise squelch action, al-
lowing you to hear very weak signals
near the background noise level.
Activates 1750 Hz Tone Burst.
Activate the Smart Search operation.
Activate the ARTS
TM
operation.
Select the CTCSS Tone Frequency.
(
Short-cut to Menu #44: TN FRQ
)
Select the DCS code.
(
Short-cut to Menu #9: DCS.COD
)
Recall the Weather Broadcast Chan-
nels.
Selects Repeater Shift direction.
Activates the Priority Channel Scan-
ning (Dual Watch).
Selects the transmit power output
level.
Activates the CTCSS or DCS opera-
tion.
Allows tuning in 1-MHz step on the
VFO frequency.
Reverses the transmit and receive
frequencies during split-frequency
operation.
Recall the Home Channel.
Switches operating band.
Switches frequency control among
the VFO, Memory System, and
Home channel.
Activate the Scanner.
Press and hold the button
Disable the noise squelch action, al-
lowing you to hear very weak signals
near the background noise level.
Activates 1750 Hz Tone Burst.
Activate the ARTS
TM
operation.
–
–
–
–
Selects Repeater Shift direction.
–
Recall the Weather Broadcast Chan-
nels.
Reverses the transmit and receive
frequencies during split-frequency
(repeater) operation.
Activates the Priority Channel Scan-
ning (Dual Watch).
Selects Repeater Shift direction.
Switch the Memory Channel display
between the “Frequency” format and
“Alpha-numeric Tag” format.
Enter the Set (“Menu”) mode.
Transfer the VFO contents into a
Memory register.
Select the scan mode.
For Menu #27 PRG PNL
Press and hold the
[
LOW
(
ACC
)]
key
Recall the Weather Broadcast Channels.
Reverses the transmit and receive frequencies during split-frequency op-
eration.
Selects Repeater Shift direction.
Disable the noise squelch action, allowing you to hear very weak signals
near the background noise level.
Selects the Key locking schemes.
(
Short-cut to Menu #21: LOCK
)
Sets the display Brightness.
Function
< WX >
< REV >
< RPTR >
< SQ.OF >
< LOCK >
< DIM >