Operation Manual

71FT-7800R OPERATING MANUAL
MENU
(
“SET”
)
MODE
Menu #20
[
INET M
]
Function: Selects the Access Number (DTMF code) for non-WIRES
TM
Internet Link Sys-
tem access.
Available Values: d- 1 ~ d-16
Default: d- 1
Menu #21
[
LOCK
]
Function: Selects the Control Locking lockout combination.
Available Values: LK KEY/LK DIAL/LK K+D/LK PTT/LK P+K/LK P+D/LK ALL/
LK OFF
Default: LK OFF
Note: “K” = “KEY,” “D” = “DIAL,” “P” = “PTT”
Menu #22
[
MIC
]
Function: Selects the microphone type to be used.
Available Values: MH-48/MH-42
Default: MH-48
Menu #23
[
NAME
]
Function: Toggles the display indication of the Memory/Home channel between “frequency”
and the channel’s “Alpha-numeric Tag.”
Available Values: FREQ/ALPHA
Menu #24
[
NM WRT
]
Function: Stores Alpha-Numeric “Tags” for the Memory/Home channels.
See page 35 for details.
Menu #25
[
PKT.MIC
]
Function: Enables/disables the microphone input during Packet operation.
Available Values: MIC.ON/MIC.OFF
Default: MIC.OFF
Menu #26
[
PKT.SPD
]
Function: Sets the transceiver’s circuitry for the Packet baud rate to be used.
Available Values: 1200bps/9600bps
Default: 1200bps
Menu #27
[
PRG.PNL
]
Function: Programming the alternate (press and hold in) function of the front panel’s
[
LOW
(
ACC
)]
key. See page 60 for details.
Available Values: WX/REV/RPTR/SQ.OF/LOCK/DIM
Default: WX