Operation Manual

27FT-7900R OPERATING MANUAL
MANUAL REPEATER SHIFT ACTIVATION
If the ARS feature has been disabled, or if you need to set a repeater shift direction other
than that established by the ARS, you may set the direction of the repeater shift manually.
To do this:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #33 (
RPT.MODRPT.MOD
RPT.MODRPT.MOD
RPT.MOD).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the desired shift among “
RPT.–RPT.–
RPT.–RPT.–
RPT.–”,
“
RPT.+RPT.+
RPT.+RPT.+
RPT.+”, and “
RPT.OFFRPT.OFF
RPT.OFFRPT.OFF
RPT.OFF.”
4. Press the
[
BAND
(
SET
)]
key momentarily to save the
new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to
ensure compatibility with local operating requirements.
To do this, follow the procedure below:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #39 (
SHIFTSHIFT
SHIFTSHIFT
SHIFT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the new repeater shift magni-
tude. The shift must be a multiple of 50 kHz.
4. Press the
[
BAND
(
SET
)]
key momentarily to save the
new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
If you just have one “odd” split that you need to program, don’t change the “de-
fault” repeated shifts using this Menu Item! Enter the transmit and receive fre-
quencies separately, as shown on page 34.
REPEATER OPERATION