Operation Manual

31FT-7900R OPERATING MANUAL
CTCSS/DCS OPERATION
SPLIT TONE OPERATION
The FT-7900R can be operated in a Split Tone configuration via the Set mode.
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #41 (
SPLITSPLIT
SPLITSPLIT
SPLIT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select “
ONON
ONON
ON” (to enable the Split Tone
feature).
4. Press the
[
BAND
(
SET
)]
key momentarily to save the
new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
When the Split Tone feature is activated, you can see the following additional parameters
after the “
DCSDCS
DCSDCS
DCS” parameter while selecting the Tone Mode by pressing the
[
TONE
(
REV
)]
key:
DD
DD
D: DCS Encode only
(the “DCS” icon will blink during operation)
ENC DCSENC DCS
ENC DCSENC DCS
ENC DCS: Encodes a CTCSS Tone and Decodes a DCS code
(the “DCS” and “ENC” icons will appear during operation)
D-DECD-DEC
D-DECD-DEC
D-DEC: Encodes a DCS code and Decodes a CTCSS Tone
(the “DCS” icon will blink and the “DEC” icon will appear during opera-
tion)
Select the desired operating mode, from the selections shown above.