Operation Manual

40 FT-7900R OPERATING MANUAL
MEMORY OPERATION
HYPER MEMORY CHANNEL OPERATION
The FT-7900R usually stores, into memory, the operating frequency and some aspects of
operating status (such as VFO scan, CTCSS/DCS data, repeater shift, power level etc.).
However, the “Hyper Memory” Mode allows you to store the total current configuration of
the radio into a special “Hyper” memory bank.
Hyper Memory Storage
1. Set up the transceiver according to the desired con-
figuration.
2. Press and hold in, for two seconds, the Hyper
Memory key
([
1
]
through
[
5
])
, corresponding to the
Hyper Memory channel into which you wish to store
this configuration.
Hyper Memory Recall
Press the appropriate Hyper Memory key
([
1
]
through
[
5
])
to recall the desired Hyper Memory channel.
On Hyper Memory Channels “2” through “5”,
the current (original) configuration will lost
when you recall any other Hyper Memory Channel.
To prevent this from happening, press and hold in the
(current) Hyper Memory key to store the current configuration into that Hyper Memory
Channel before recalling anothe Hyper Memory Channel, or set Menu #17 (HYPER) to
enable the Automatic Writing feature for all Hyper Memories, including Hyper Memory
“1”. See page 72 for details.