Operation Manual

59FT-7900R OPERATING MANUAL
INTERNET CONNECTION FEATURE
operation.
4. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second
to enter the Set mode again, then rotate the DIAL knob
to select Menu #18 (
I NETI NET
I NETI NET
I NET).
5. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to set this Item to “
INT.MEMINT.MEM
INT.MEMINT.MEM
INT.MEM” (to enable
the alternative Internet Link, and disable the WiRES
TM
SRG access option).
6. Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
7. Press the
[ ]
key momentarily to activate the Internet
Link System. The “ ” icon will then appear on the
display.
8. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
9. Rotate the DIAL knob to select Menu #20 (
INT MRINT MR
INT MRINT MR
INT MR).
10. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the DTMF Autodialer memory
channel number (“
d-1d-1
d-1d-1
d-1” through “
d-16d-16
d-16d-16
d-16”) corresponding
to the Internet link repeater you wish to establish an
Internet link with.
11. Press the
[
BAND
(
SET
)]
key momentarily to lock in the selected access number, then
press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
12. With the Internet link feature activated (as in step 7 above), press the
[ (
L
)]
key while
you are transmitting, to send out the DTMF tones according to your selection in step 10
(to establish the link to the Internet link repeater).
13. To disable the Internet link feature, press the
[ (
L
)]
key again.
To return to WiRES
TM
, recall Menu #18 (I NET) then set it to “INT.COD”.