Operation Manual

62 FT-7900R OPERATING MANUAL
PROGRAMMING THE KEY ASSIGNMENTS
Default FT-7900R functions have been assigned to “alternate” (press and hold in) function
of the front panel’s
[
LOW
(
ACC
)]
key, as well as the Microphone’s
[
P1
]
/
[
P2
]
/
[
P3
]
/
[
P4
]
buttons’ functions (for the MH-48A6J;
[
ACC
]
/
[
P
]
/
[
P1
]
/
[
P2
]
buttons for MH-42B6JS) at the
factory. These may be changed by the user, if you wish to utilize another function on one of
these keys.
To program the function assigned to a key:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select the Menu Item to be
configured (“#27
PRG PNLPRG PNL
PRG PNLPRG PNL
PRG PNL”, “#28
PRG P1PRG P1
PRG P1PRG P1
PRG P1
(
PRG ACCPRG ACC
PRG ACCPRG ACC
PRG ACC)”, “#29
PRG P2PRG P2
PRG P2PRG P2
PRG P2 (
PRG PPRG P
PRG PPRG P
PRG P)”, “#30
PRG P3PRG P3
PRG P3PRG P3
PRG P3
(
PRG P1PRG P1
PRG P1PRG P1
PRG P1)”, or “#31
PRG P4PRG P4
PRG P4PRG P4
PRG P4 (
PRG P2PRG P2
PRG P2PRG P2
PRG P2)”).
3. Press the
[
BAND
(
SET
)]
key momentarily, then rotate
the DIAL knob to select the function you wish to assign
to the button you selected in the previous step.
4. Press the
[
BAND
(
SET
)]
key to save the new setting, then rotate the DIAL knob to select
another programmable button to modify, if desired, and repeat the above steps.
5. Press the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in
the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
MISCELLANEOUS SETTINGS