Operation Manual

67FT-7900R OPERATING MANUAL
The FT-7900R Set (Menu) mode, already described in parts of many previous chapters, is
easy to activate and set. It may be used for configuration of a wide variety of transceiver
parameters, some of which have not been detailed previously. Use the following procedure
to activate the Set (Menu) mode:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select the Menu Item to be
adjusted.
3. Press the
[
BAND
(
SET
)]
key momentarily to enable
adjustment of the selected Menu item, then rotate the
DIAL knob to perform the actual adjustment.
4. After completing your selection and adjustment, press
the
[
BAND
(
SET
)]
key momentarily to save the new setting, then press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
You may see the small letters “HYP” or “E CH” at the upper left-hand corner in
the display while adjusting certain Menu items. These denote special characteris-
tics of these particular Menu items:
1) The “HYP” character indicates that each Hyper Memory may have distinct param-
eters assigned to it pertaining to this Menu item;
2) The “E CH” character indicates that each Operating Mode (VFO, Memory Channel,
or Home Channel) may have distinct parameters assigned to it pertaining to this Menu
item.
MENU
(
“SET”
)
MODE