Operation Manual

77FT-7900R OPERATING MANUAL
Menu #43
[
STEP
]
Function: Sets the Synthesizer steps.
Available Values: AUTO/5.0 k/10.0 k/12.5 k/15.0 k/20.0 k/25.0 k/50.0 k/100 k
Default: Depends on the band of operation.
Note: 5 kHz and 15 kHz steps are not available for use on above 700 MHz.
Menu #44
[
TN FRQ
]
Function: Sets the CTCSS Tone Frequency.
Available Values: 50 Standard CTCSS Tones
Default: 100 Hz
Note: This Menu Item can be set independently
for each band, and independently in each
memory.
Menu #45
[
TOT
]
Function: Sets the Time-Out Timer.
Available Values: 1 - 30 minutes or OFF
Default: 6 minutes
Menu #46
[
VFO.BND
]
Function: Selects or disables the VFO band edge limiting for the current band.
Available Values: BND.ON/BND.OFF
Default: BND.ON
BND.ON: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice versa).
BND.OFF: When the VFO frequency reaches the high edge of the current band, the VFO
frequency will jump to the low band edge of the next band (or vice versa).
Menu #47
[
WID.NAR
]
Function: Reducing the MIC Gain (and Deviation).
Available Values: WIDE/NARROW
Default: WIDE
Note: This Menu Item can be set independently for each band.
Menu #48
[
WX ALT
]
Function: Enables/disables the Weather Alert Scan feature
Available Values: ALT.ON/ALT.OFF
Default: ALT.OFF
MENU
(
“SET”
)
MODE
CTCSS TONE FREQUENCY
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7
82.5 85.4 88.5 91.5 94.8 97.4
100.0 103.5 107.2 110.9 114.8 118.8
123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9
171.3 173.8 177.3 179.9 183.5 186.2
189.9 192.8 196.6 199.5 203.5 206.5
210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1 – – – –