Operation Manual

Memory Operation

Labeling Memories

You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid

in recollection of the channel’s intended use (such as a club name, etc.). This is easily ac-

complished using the Menu mode.

1. Recall the memory channel onto which you wish to appended a label.

2. Press and hold in the

key for one second to enter the Menu mode.

3. Rotate the

knob to recall Menu #35 (MEM TAG).

4. Press the

knob to enable the programming of the label.

5. Rotate the

knob to select the rst character (number, letter, or symbol) in the

name you with to store, then rotate the

knob clockwise to move to the next char-

acter.

6. Again rotate the

knob to select the next number, letter, or symbol, then rotate the

knob clockwise to move to the next character’s slot.

7. Repeat step 6 as many times as necessary to complete the name tag for the memory,

then press and hold in the

key for one second to save the A/N (Alpha-Numeric)

name entry and exit to normal operation.

During Memory operation, press the

key momentarily, then

rotate the

knob, as needed, until Operating Function Row

[

MW, MC, TAG

]

appears on the display. Press the

(

TAG

)

key momentarily to activate the alpha-numeric Tag. Repeatedly

pressing this key will toggle operation between “Frequency” dis-

play and “Tag” display.

You can recall Menu #35 (MEM TAG) instantly by pressing

and holding in the

(

TAG

)

key for one second.

“Frequency” Display

“Tag” Display