Operation Manual

59
Menu Operation
Menu Item 32 [LOCK MODE]
Function: Select the operation of the front panel’s
key.
Available Values: DIAL/FREQ/PANEL
Default: DIAL
DIAL: Locks
knob only
FREQ: Locks front panel keys and knobs related to frequency control (such as
and
key,
(
A/B
)
key., etc.)
PANEL: Locks all front keys and knobs (except
key and key)
Menu Item 33 [MAIN STEP]
Function: Setting of the
knob’s tuning speed.
Available Values: FINE/COARSE
Default: FINE
You may choose between two speeds for the
knob. Selecting “COARSE” doubles
the tuning rate compared to the default value.
Menu Item 34 [MEM GROUP]
Function: Enable/disable the memory grouping feature
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to “ON,” the 200 “standard” memory channels are partitioned
into ten Memory Groups, each holding up to 20 memory channels.
Menu Item 35 [MEM TAG]
Function: Store Alpha-Numeric “Tags” for the memory channels.
Up to eight characters may be stored. The storage procedure is as follows:
1. Recall the memory channel on which you wish to append a label.
2. Recall this Menu Item [Menu #35 (MEM TAG)].
3. Press the
knob momentarily to initiate storing of the Tag (an under-bar will
appear below the rst character location).
4. Rotate the
knob to select the rst character (number, letter, or symbol) in the
name you with to store, then rotate the
knob clockwise to move to the next
character.
5. Again rotate the
knob to select the next number, letter, or symbol, then rotate
the
knob clockwise to move to the next character’s slot.
6. Repeat step 5 as many times as necessary to complete the name tag for the mem-
ory.
7. Press the
knob to save the A/N (Alpha-Numeric) Tag and exit.
Menu Item 36 [MIC KEY]
Function: Enable/disable CW keying by the microphone’s
[
UP
]
/
[
DWN
]
keys.
Available Values: OFF/ON
Default: OFF
When this Menu Item is set to “ON,” press the microphone’s
[
UP
]
key to send a “dot,” and
press the microphone’s
[
DWN
]
key to send a “dash” (while the built-in electronic keyer is
engaged).