Operation Manual

Set (Menu) Mode
The FT-65R/E Set Mode, already partially described in the previous chap-
ters, may be activated to select or change various transceiver functions.
Many of the useful parameter congurations have not been fully detailed in
this manual. Refer to the chart below for a list of the Set Mode Items and
their various parameters.
1. Press and hold the F key to enter the Set Mode.
2. Press the [▲] or [▼] key to select the Set Mode Item to be adjusted.
3. Press the F key momentarily to enable adjustment of the Set Mode Item.
4. Press the [▲] or [▼] key to adjust or select the parameter to be changed
on the Set Mode Item selected in above step.
5. After completing your selection and adjustment, press the PTT switch mo-
mentarily to save the new setting and exit to normal operation.
Press and hold the F key to move from the lower menu con-
tents to the upper menu contents in the Set Mode.
Item
(lower menu
item)
Function Values Default Value
1 APO Setting of the Automatic
Power-Off feature.
OFF / 0.5H to 12.0H
(Step 0.5H)
OFF
2 ARTS Selects the Beep
option and the Polling
Interval during ARTS
operation.
BEEP= INRANG /
ALWAYS / OFF
INTV= 25SEC / 15SEC
BEEP=OFF
INTV= 25SEC
3 BATTSAVE Selects the Receive-
mode Battery Saver
interval (“sleep” ratio)
200mS / 300mS / 500mS
/ 1SEC / 2SEC / OFF
200mS
4 B-CH.L/O Enables/Disables the
Busy Channel Lock-
Out feature.
OFF / ON OFF
5 BEEP Beep function Enable/
Disable on presssing
the keypad, or stopping
the receiver scanning.
KEY+SC / KEY / OFF KEY+SC
6 BELL Select the number of
CTCSS/DCS/PAGER/
ARTS Bell ringer
repetitions.
OFF / 1Time / 3Times/
5Times / 8Times /
CONTINUE
OFF
7 COMPANDE
(COMPANDER)
Enables/Disables the
Voice Compander
feature
OFF / ON OFF
40 FT-65R/FT-65E Operating Manual