Operation Manual

Item
(lower menu
item)
Function Values Default Value
21 PAGER Setting the TX CTCSS
of 2 tone and the RX
CTCSS of 2 tone.
Enables/disables the
Answer Back function.
TX: ** **
RX: ** **
ACK : ON / OFF
TX=05 47
RX=05 47
ACK=OFF
22 PASSWORD Enables/disables the
Password feature
OFF / ON / OFF
23 PRI.RVT Enables/disables the
Priority Revert feature.
RVT.OFF / RVT. ON RVT.OFF
24 REPEATER ARS / MODE / SHIFT
function setting
ARS= ON / OFF
MODE=SIMPLEX / +RTP
/ -RTP
SHIFT= 0.05 MHz - 99.95
MHz (per 50KHz)
ARS=ON
MODE=SIMPLEX
SHIFT=**.**M (*)
25 RESUME Selects the Scan
Resume mode.
BUSY / HOLD / TIME BUSY
26 RF SQL Adjusts the RF Squelch
threshold level.
S-1 / S-2 / S-3 / S-4 / S-5
/ -6 / S-8 / S-FULL / OFF
OFF
27 SCN.LAMP Enables/Disables
the Scan lamp while
paused.
ON / OFF ON
28 SKIP
(SKIP SCAN)
Selects the Memory
Scan “Skip” channel-
selection mode.
− −
29 SQL TYPE Selects the Tone
Encoder and/or
Decoder mode.
OFF / R-TONE / T-TONE
/ TSQL / REV TN / DCS /
PAGER
OFF
30 STEP Setting of the frequency
steps.
5 / 6.25 / 10 / 12.5 / 15 /
20 / 25 / 50 / 100 kHz, or
AUTO
AUTO
31 TOT Setting of the TOT
time.
1 min - 30 min (per 1
min) or OFF
3min
32 TX PWR Selects TX Power HI(5W) / MID(2.5W) /
LOW(0.5W)
HI(5W)
42
Set (Menu) Mode
FT-65R/FT-65E Operating Manual