Operation Manual

VX-7R OPERATING MANUAL34
TONE CALLING
(
1750 HZ
)
If the repeaters in your country require a 1750-Hz burst tone for access (typically in
Europe), you can set the MONI key to serve as a “Tone Call” switch instead. To change
the configuration of this switch, we again use the Menu to help us.
1. Press the key, then press the key to enter the Set mode.
2. Rotate the DIAL to select the Menu Item labeled (
Misc Setup #3 MONMisc Setup #3 MON
Misc Setup #3 MONMisc Setup #3 MON
Misc Setup #3 MON/
T-CALT-CAL
T-CALT-CAL
T-CAL).
3. Press the or key to select “
T-CALLT-CALL
T-CALLT-CALL
T-CALL” on the dis-
play.
4. Press the PTT key to save the new setting and exit to nor-
mal operation.
5. To access a repeater, press and hold in the MONI key for the amount of time specified
by the repeater owner/operator. The transmitter will automatically be activated, and a
1750-Hz audio tone will be superimposed on the carrier. Once access to the repeater
has been gained, you may release the MONI key, and use the PTT key for activating
the transmitter.
ADVANCED OPERATION