Operation Manual

VX-7R OPERATING MANUAL48
Labeling Memories
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set mode.
1. Recall the memory channel on which you wish to append a label.
2. Press the key, then press the key to enter the Set mode.
3. Rotate the DIAL to select the Menu Item labeled (
Basic Setup #11: NAME SETBasic Setup #11: NAME SET
Basic Setup #11: NAME SETBasic Setup #11: NAME SET
Basic Setup #11: NAME SET).
4. Press the key momentarily to enable programming of
the name tag.
5. Press the / key, or one of the keyboard keys, to
select the first digit of the desired label.
Example 1: Press the key, then press the or key to select any of the 61
available characters.
Example 2: Press the key repeatedly to toggle among the seven available charac-
ters associated with that key: A Æ B Æ C Æ a Æ b Æ c Æ 2
6. Rotate the DIAL one click clockwise to move to the next character.
7. Repeat steps 5 and 6 to program the remaining letters,
numbers, or symbols of the desired label. A total of eight
characters may be used in the creation of a label.
8. When you have completed the creation of the label, press
the PTT key to save the label and exit.
1) During “MR” (Memory Recall) operation, the
alphanumeric Tag will appear below the fre-
quency display. The alphanumeric Tag does not
appear if you activate the Dual Receive Operation.
2) Be sure that the “small character” mode is in use if you wish to program and view
Alpha-Numeric labels. Press the key, the press the or key, to toggle to
small characters if you are in the “double-size” character mode. See page 25 for more
details.
MEMORY MODE
REGULAR MEMORY CHANNEL OPERATION