Operation Manual

VX-7R OPERATING MANUAL 79
STROBE CUSTOMIZATION
The VX-7R’s STROBE also includes customization options.
COLOR Selection
1. Press the key, then press the key to enter the Set Mode.
2. Rotate the DIAL to select the Menu Item labeled (
Display Setup #7: LED COLOR 2Display Setup #7: LED COLOR 2
Display Setup #7: LED COLOR 2Display Setup #7: LED COLOR 2
Display Setup #7: LED COLOR 2).
3. Press the key to enable modification of this Menu Item.
4. Press the or key to select the desired band or
status which you wish to utilize. Available selections are:
Main BUSYMain BUSY
Main BUSYMain BUSY
Main BUSY: Sets the STROBE color displayed while
the squelch is open on the “Main” band.
Sub BUSYSub BUSY
Sub BUSYSub BUSY
Sub BUSY: Sets the STROBE color displayed while the squelch is open on the
“Sub” band.
DUAL BUSYDUAL BUSY
DUAL BUSYDUAL BUSY
DUAL BUSY: Sets the STROBE color displayed during Dual Receive operation.
Main TXMain TX
Main TXMain TX
Main TX: Sets the STROBE color displayed while transmitting on the “Main”
band.
Sub TXSub TX
Sub TXSub TX
Sub TX: Sets the STROBE color displayed while transmitting on the “Sub”
band.
CHG CompleteCHG Complete
CHG CompleteCHG Complete
CHG Complete: Set the STROBE color when battery charging is finished.
5. Turn the DIAL one click clockwise, then press the or key to select the desired
color to be illuminated in place of the regular color.
6. Press the PTT key momentarily to save the your new setting and exit to normal operation.
COLOR Editor
The exact color mix of the “STROBE’s” color selections may be adjusted, providing you
with a custom-designed color hue. The Red, Green, and Blue elements of each color’s
composition may be adjusted individually.
1. Press the key, then press the key to enter the Set Mode.
2. Rotate the DIAL to select the Menu Item labeled (
Display Setup #6: LED COLOR 1Display Setup #6: LED COLOR 1
Display Setup #6: LED COLOR 1Display Setup #6: LED COLOR 1
Display Setup #6: LED COLOR 1).
3. Press the key to enable modification of this Menu Item.
4. Press the or key to select the desired color which
you wish to edit.
Turn the DIAL one click clockwise, then press the or
key to adjust the “
RR
RR
R” (red) element of the color; you will be able to see the effects
of your changes; the degree of color hue is designated in a numerical scale of
00
00
0 through
255255
255255
255. If you press the key, then press the or key, you can now change the
“
RR
RR
R” element in 10-step increments, allowing very quick selection.
5. Repeat above step to adjust the “
GG
GG
G” (Green) and “
BB
BB
B” (Blue) elements of the color.
6. Press the key to save the new setting, then press the PTT key to exit to normal
operation.
DISPLAY CUSTOMIZATION