User manual

Studio Spot

250 / Studio Color

250 User Manual General Maintenance 7-17

4. Remove the lens by pulling it straight up from the assembly.

5. Place the new lens in the assembly.

Note: Before installing the new lens, you may need to clean it by using a soft,

lint-free cotton cloth and a mild glass cleaning solution (containing no

ammonia).

6. Replace and tighten the three #2 Phillips-head lens screws that secure the lens

to the lens assembly.

7. Replace the bezel and engage the bezel latches.

Replacing the Studio Color

250 lens

You will need:

• replacement lens

• #2 Phillips-head screwdriver

To replace the Studio Color 250 lens:

1. Electrically isolate the fixture. If the fixture has been operating, allow the

fixture to cool before handling.

2. Remove the bezel by unlatching the two bezel latches (see Figure 7-17).

lens

remove the three lens screws and pull

the lens straight up from the assembly

Figure 7-21. The three lens screws.