User manual

7-18 General Maintenance Studio Spot
®
250 / Studio Color
®
250 User Manual
3. Remove the three #2 Phillips-head lens screws and remove the lens by pulling
it straight up from the assembly (see
Figure 7-22).
4. Place the new lens in the assembly.
Note: Before installing the new lens, you may need to clean it by using a soft,
lint-free cotton cloth and a mild glass cleaning solution (containing no
ammonia).
5. Replace and tighten the three #2 Phillips-head lens screws that secure the lens
to the lens assembly.
6. Replace the bezel and engage the bezel latches.
Figure 7-22. Remove the screws that secure the lens to the lens assembly.
lens
remove the three lens screws and pull
the lens straight up from the assembly