User manual

Studio Spot
®
250 / Studio Color
®
250 User Manual Introduction intro-1
Introduction
Congratulations on your purchase of the Studio Spot
®
250 or Studio Color
®
250
automated luminaire.
Studio Spot 250 fixtures use a high-efficiency optical configuration with a patented
reflector and optical train to produce sharp, high contrast images. Shipped standard
with Studio Spot 250 are seven high-resolution LithoPatterns
®
which allow full
rotating and indexing. Over the litho, you can superimpose a secondary static or
rotating litho for moiré and morphing effects. Studio Spot 250 also includes an iris for
even more control over image and beam size. Each Studio Spot 250 is fitted with a
13-position color wheel and a 5-position, rotating effects wheel which includes prisms
and effects glass as standard.
The Studio Color 250 fixture is a soft-focus companion to the Studio Spot 250. Studio
Color 250 uses the same yoke mechanism, electronics, and optical system as Studio
Spot 250, and produces over 7,000 lumens. Fitted with a full CYM (cyan, yellow, and
magenta) subtractive color mixing system, Studio Color 250 also includes six
independent colors (including a black light filter) to supplement its spectrum of colors.
A lenticular effect wheel allows variable horizontal and vertical beam shaping.
Studio Spot
®
250 Features
• Two user types (A and B) per fixture, each with an on-board 16 scene memory for
a total of 32 scene memory per fixture in stand-alone mode.
• High-resolution DMX 512 control.
• Easy-to-program alphanumeric LED (light emitting diode) display.
• DMX macro channel factory-programmed with unique combinations of constructs
including functions such as ballyhoos and lazy-eight movements - functions which,
in the past, could be accomplished only with the use of top of the range
controllers.
• Iris that provides full control over beam size.
• Both 3-pin and 5-pin XLR connectors.
• Factory-programmed fixture demo built in as a preset default while in stand-alone
mode.
• High efficiency, 2000 hour MSD250/2 lamp developed by Philips
®
in conjunction
with High End Systems
®
, Inc.
• Motion range of 570° pan and 270° tilt.
• Exclusive Lightwave Research
®
multi-phase technology and optical encoders to
automatically correct the beam’s position if the fixture’s head is jarred from its
programmed position.