User manual

intro-2 Introduction Studio Spot
®
250 / Studio Color
®
250 User Manual
• High efficiency reflector and optical train providing over 4,000 total lumens.
• Color wheel that includes 12 positions (plus open) and allows for easy dichroic
filter changes. Colors chosen to match the Technobeam
®
automated luminaire.
• Fully rotating and indexing litho wheel that includes 7 positions (plus open) and
allows for easy litho changes.
• Double-stacking litho options for moiré and morphing effects.
• Fully rotating effects wheel with four positions (plus open) including frost, 3-way
prism, infinity prism, and distortion art glass.
• Enhanced construct parameters including ramp/snap, random, and spin functions.
• Projector sharp, high contrast output.
• Factory-installed 18° lens with optional lens sets available as accessories.*
• Time code synchronization in stand-alone mode via master/slave links to any
combination of Technobeam, Studio Spot
®
, Studio Color 250, and Studio Spot
250 fixtures.
• DMX analyzer for easy DMX troubleshooting.
• Variable-speed strobe.
• Full dimming and fade-to-black.
• Remote focus.
• LED status indicators.
• Precision stepper motors used to control iris, shutter, color, and effects wheels.
• Remote fixture power up and shut down.
• Optional Laser Aiming Device (LAD™) for beam positioning in daylight or high
ambient light conditions.
*All beam angles are accurate to ±1°
Studio Color
®
250 Features
• Two user types (A and B) per fixture, each with an on-board 16 scene memory for
a total of 32 scene memory per fixture in stand-alone mode.
• High-resolution DMX 512 control.
• Easy-to-program alphanumeric LED (light emitting diode) display.
• DMX macro channel factory-programmed with unique combinations of constructs
including functions such as ballyhoos and lazy-eight movements - functions which,
in the past, could be accomplished only with the use of top of the range
controllers.
• Both 3-pin and 5-pin XLR connectors.
• Two user types allowed per fixture, each with its own 16-scene memory and
fixture settings.
• Factory-programmed fixture demo built in as a preset default while in stand-alone
mode.