User manual

Studio Spot
®
250 / Studio Color
®
250 User Manual DMX Control A-9
A
Studio Color
®
250 Construct Parameters
Table A-3 lists the 15 Studio Color 250 constructs and their corresponding DMX
controller values. If you have a numeric-type controller, use the Value Decimal (dec.)
column. If you have a fader-type controller, use the Value Percentage (%) column. If
your controller allows you to program hex values, use the Value (hex) column.
The values in Table A-3 may vary slightly depending on your controller’s rounding
convention.
Table A-3. Studio Color
®
250 Construct Parameters
Channel Construct Description
Value
(dec.)
Value
(%)
Value
(hex)
1 Pan Pan Coarse 0 - 255 0-100 0-FF
2 Pan Pan Fine 0 - 255 0-100 0-FF
3 Tilt Tilt Coarse 0 - 255 0-100 0-FF
4 Tilt Tilt Fine 0 - 255 0-100 0-FF
5 Color Function
Full Speed Control
Continuous 0 - 15 0-6 0-0F
Indexed 16-31 6-12 10-1F
Pure Mix 32-47 13-18 20-2F
Spin 48-63 19-25 30-3F
Cycle 64-79 25-31 40-4F
Not Assigned - To Be Determined 80-95 31-37 50-5F
Random 96-111 38-44 60-6F
Blink-Indexed 112-127 44-50 70-7F
MSpeed Control
Continuous 128-143 50-56 80-8F
Indexed 144-159 57-62 90-9F
Pure Mix 160-175 63-69 A0-AF
Spin 176-191 69-75 B0-BF
Cycle 192-207 75-81 C0-CF
Not Assigned - To Be Determined 208-223 82-88 D0-DF
Random 224-239 88-94 E0-EF
Blink-Indexed 240-255 94-100 F0-FF
6
Cyan Color
Wheel
Continuous Mode
Open 0 0 0
Color 1 42 17 2A
Color 2 85 33 55
Cyan In (Full saturation) 127 50 7F
Cyan Out (Low saturation) 255 100 FF
Indexed Mode