User manual

intro-6 Introduction Studio Spot
®
250 / Studio Color
®
250 User Manual
Electrical Specifications
Warning: Class 1 equipment - This equipment must be earthed.
Factory setting: 230V, 50Hz
Selectable voltages: 100V, 50Hz, 3.75 A
120V, 50Hz, 3.13 A
230V, 50Hz, 1.6 A
100V, 60Hz, 3.75 A
120V, 60Hz, 3.13 A
208V, 60Hz, 1.8 A
Rated power: 375 W
Fuses: F1 - 6.3A, 250V, Fast Blow only (5 mm x 20 mm)
F2 - 2.5A, 250V, Fast Blow only (5 mm x 20 mm)
F3 - 6.3A, 250V, Slow Blow only (5 mm x 20 mm)
Environmental Specifications
Maximum ambient temperature, (T
a
): 50° C (122° F)
Maximum exterior surface temperature: 100° C (212° F)
Minimum distance to flammable objects: 3.28 ft (1.0 m)
Minimum distance to lighted object: 3.28 ft (1.0 m)
Do not mount on a flammable surface.
Laser Aiming Device (LAD™) Specifications
• Class 3a laser product
• Beam divergence angle: 0.2mRad to 0.3mRad
• Maximum output (continuous): 5mW at 630-650 nm
• Maximum output (pulsed): <2.5mW
• Pulse modulation: 4.25Hz to 255Hz @ 50% duty cycle
• Pulse duration: 1.96ms to 117ms
• Pulse energy: 9.8µJ to 585µJ
LAD™ Safety Standards
• EN60825-1, 1994
• 21CFR 1040