User manual

1-10 Setup and Installation Studio Spot
®
250 / Studio Color
®
250 User Manual
2. Connect the female XLR cable connector of the same data cable to the first (or
next) fixture’s 3-pin or 5-pin Data In connector (see
Figure 1-10).
3. Continue using this method to link the remaining fixtures together by connecting a
male XLR cable connector (with attached data cable) to one fixture’s Data Out
connector and the female XLR cable connector of the same data cable to the next
fixture’s Data In connector (see
Figure 1-11).
See “DMX Start Channels” on page A-1 for information on how many fixtures can
be connected per link.
Caution: Do not connect more than one Data In and one Data Out
connector to each fixture.
Figure 1-10. Data In and Data Out connectors on the fixture’s side panel.
Female XLR
cable connector
3-pin Data
In connector
5-pin Data
In connector
DMX controller
3-pin Data
Out connector
5-pin Data
Out connector
DMX controller
terminator
Figure 1-11. Linking the fixtures.