User manual

Studio Spot
®
250 / Studio Color
®
250 User Manual Configuring the Fixture 2-5
2
To assign a unique DMX start channel for the fixture:
1. Press and hold the <Menu> button until “ADDR” appears on the LED
display.
2. Press the <Enter> button to enter the “ADDR” menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the desired DMX
start channel and press the <Enter> button to select the desired DMX start
channel.
Note: You must assign a unique fixture address to each Studio Spot 250 or
Studio Color 250 fixture that you wish to respond independently to
controller commands.
Determining the Unique Fixture Number
The fixture number is a number you assign that represents each unique fixture’s
channel range in the DMX 512 link. If you are using one DMX link to control fixtures
which all use the same number of DMX channels (as recommended), you can assign
fixture numbers in ascending order (see
Table 2-2).
To assign a unique fixture number to your fixture:
1. Press and hold the <Menu> button until “ADDR” appears on the LED
display.
2. Press the <Enter> button to enter the “ADDR” menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the desired fixture
number and press the <Enter> button.
Note: You must assign a unique fixture address to each Studio Spot 250 or
Studio Color 250 fixture that you wish to respond independently to
controller commands.
Table 2-2. Example: Determining the Unique Fixture Number
Fixture location
on the link
Fixture name
Number of DMX channels
used per fixture
Fixture
number
Channel
range used
First Studio Spot 250 18 channels F 01 1-18
Second Studio Spot 250 18 channels F 02 19-36
Third Studio Spot 250 18 channels F 03 37-54
Fourth
Other device
(using 18 channels)
18 channels F 04 55-72
to
to