User manual

3-2 Operating the Fixture Studio Spot
®
250 / Studio Color
®
250 User Manual
Programming With a DMX Controller
When you program your fixtures with a DMX controller, you are assigning a DMX
value to each of the fixture’s constructs. A construct is a specific feature of the fixture
that helps to design the “look” of the light beam (such as the color, effect, or focus).
For controller values for each construct setting, see “Studio Spot® 250 Construct
Parameters” on page A-2 or “Studio Color® 250 Construct Parameters” on page A-9.
Fixture Constructs
The constructs available for each fixture type are listed in Table 3-1 and described in
detail in this section.
Table 3-1. Fixture Constructs and Channel Assignments
Fixture Type Construct DMX Channel
Studio Spot
250
Pan - High Resolution 1
Pan - Low Resolution 2
Tilt - High Resolution 3
Tilt - Low Resolution 4
Color Function 5
Color Position 6
Litho Function 7
Litho Position 8
Litho Rotate 9
Effects Position 10
Effects Rotate 11
Focus 12
Iris 13
Shutter 14
Dim 15
MSpeed 16
Macro/LAD™ 17
Control 18