User manual

4-2 Understanding the Menu System Studio Spot
®
250 / Studio Color
®
250 User Manual
Pressing the <Menu> button returns you to the previous option or menu without
changing the value of an option.
Accessing the Menu System
To access the menu system, press and hold the <Menu> key until “ADDR” appears
on the LED display. The menu system is protected against inadvertent menu changes
by requiring the <Menu> button to be held for a few seconds before allowing entry
to the menus.
To exit the menu system, you must keep pressing the <Menu> button to back out of
each menu level until “MENU” appears on the LED display. “MENU” will be
replaced, after a few seconds, with the default alternating display of the fixture’s
software version and the fixture number/DMX start channel.
Note: The words “AUTO” and “LOCK” will appear briefly on the display after
“MENU.” As mentioned above, the fixture’s software is “locking” the
display after you have accessed the menu system.
Menu Maps
Studio Spot
®
250 Menu Map
A complete map of the menu system for Studio Spot 250 is shown in Table 4-1. See
individual subsections for descriptions of each menu item.
Ta b l e 4 - 1. S tu d io S po t
®
250 Menu Map
Menu
Level 1
Menu
Level 2
Menu
Level 3
Menu
Level 4
Menu
Level 5
Description
ADDR Fxx/Cxxx
change the existing fixture number/DMX start
channel
SET
FACT
ON set factory defaults on
OFF set factory defaults off
SWAP
ON set pan/tilt swap on
OFF set pan/tilt swap off
T/IN
ON set tilt invert on
OFF set tilt invert off
P/IN
ON set pan invert on
OFF set pan invert off
DSPL ON set LED display on