User manual

Studio Spot
®
250 / Studio Color
®
250 User Manual Understanding the Menu System 4-3
4
SET
DSPL
OFF set LED display off
DIM dim LED display
D/IN
ON invert LED display orientation
OFF set normal LED display orientation
CHNL
ADDR set control method to fixture number
DMX set control method to DMX start channel
LMPL
ON enable lamp hour warning message
OFF disable lamp hour warning message
MODE
TYPE
SPOT set the fixture type to Studio Spot 250
COLR set the fixture type to Studio Color 250
USER
A select user A settings
B select user B settings
COPY
PRST
A → B
copy user A presets to user B
B → A
copy user B presets to user A
SETT
A → B
copy user A settings to user B
B → A
copy user B settings to user A
ALL
A → B
copy user A presets and settings to user B
B → A
copy user B presets and settings to user A
XLD
crossload fixture software to all other Studio Spot
250 and Studio Color 250 fixtures on the link
TEST
HOME home the fixture
LAMP
ON strike the lamp
OFF extinguish the lamp
BOOT copy the boot sector
SELF
ALL self test all constructs
PAN self test pan movement
TILT self test tilt movement
COL self test color wheel movement
LTO self test litho wheel movement
FX self test effects wheel movement
FCUS self test lens focus movement
IRIS self test iris movement
SHUT self test shutter strobe movement
DIM self test dim flag movement
S/UP
place the fixture in setup mode for mechanical
homing
DISP self test LED display
CODE Factory use only
INFO
PCB view the current internal board temperature (C)
HEAD view the current internal head temperature (C)
L/HR view the current number of lamp hours
Ta b l e 4 - 1. S tu d io S po t
®
250 Menu Map
Menu
Level 1
Menu
Level 2
Menu
Level 3
Menu
Level 4
Menu
Level 5
Description