User manual

Studio Spot

250 / Studio Color

250 User Manual Understanding the Menu System 4-21

Setting Factory Defaults (FACT)

When you set this menu item on, all factory options return to their default settings.

Studio Spot 250 and Studio Color 250 fixtures are shipped from the factory with the

following options set to the following defaults:

• pan/tilt swap = off

• tilt invert = off

• pan invert = off

• LED display = on and bright

• LED display invert = off

• lamp life warning = disabled

• preset playback = off

To change the factory option default setting:

1. Press and hold the <Menu> button until “ADDR” appears on the LED

display.

2. Using the <Up> and <Down> arrow buttons, scroll to the “SET” menu

and press the <Enter> button to select the “SET” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “FACT” menu.

(This will be the first menu displayed.) Press the <Enter> button to select

the “FACT” menu.

4. Using the <Up> and <Down> arrow buttons, choose “ON” to set the

factory option defaults on, or “OFF” to manually set the factory option

defaults off. Press the <Enter> button to select the desired option.

Note: Selecting the “OFF” option will have no effect on the individual preset

values. To change the value of any of the individual presets listed

above, you must access each preset’s corresponding menu item.

When you change any of the preset default values individually, this

menu item will automatically be turned off.