User manual

4-22 Understanding the Menu System Studio Spot

250 / Studio Color

250 User Manual

Swapping Pan and Tilt (SWAP)

This menu option swaps the pan motor and tilt motor

operation. This option allows a perpendicularly-hung

fixture to respond to pan and tilt movement commands

in the same direction as a fixture hung normally (see

Figure 4-2).

To swap pan and tilt motion:

1. Press and hold the <Menu> button until

“ADDR” appears on the LED display.

2. Using the <Up> and <Down> arrow buttons, scroll to the “SET” menu

and press the <Enter> button to select the “SET” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “SWAP” menu

and press the <Enter> button to select the “SWAP” menu.

4. Using the <Up> and <Down> arrow buttons, choose the “ON” option to

swap the fixture’s pan and tilt motion, or the “OFF” option to return the

fixture’s pan and tilt motion to normal orientation. Press the <Enter>

button to select the desired option.

Inverting Tilt (T/IN)

This menu item inverts the direction of the tilt motor, which

allows a fixture standing upright (i.e., resting on its bottom panel)

to respond to tilt movement commands in the same direction as

a fixture hung normally (see

Figure 4-3).

To invert the fixture’s tilt motion:

1. Press and hold the <Menu> button until “ADDR”

appears on the LED display.

2. Using the <Up> and <Down> arrow buttons, scroll

to the “SET” menu and press the <Enter> button to

select the “SET” menu.

3. Using the <Up> and <Down> arrow buttons, scroll to the “T/IN” menu

and press the <Enter> button to select the “T/IN” menu.

4. Using the <Up> and <Down> arrow buttons, choose the “ON” option to

invert the fixture’s tilt motion, or the “OFF” option to return the fixture’s tilt

motion to normal orientation. Press the <Enter> button to select the

desired option.

Figure 4-2. Perpendicularly-

hung fixture.

Figure 4-3.

Inverted fixture.