User manual

4-36 Understanding the Menu System Studio Spot
®
250 / Studio Color
®
250 User Manual
• TLTH - high 8-bit tilt value
• TLTL - low 8-bit tilt value
• COLC - color control value
• CYAN - cyan color wheel position**
• MAGN - magenta color wheel position**
• YELW - yellow color wheel position **
• COL - color wheel position*
• LTOC - litho control value*
• LTO - litho wheel position*
• LTR - litho wheel rotation value*
• FX - effects wheel position*
•BEAM - beam shaping (lenticular) wheel position**
• FXR - effects wheel rotation value*
• FCUS - lens focus position (for Studio Spot 250 fixtures) or beam angle/zoom
position (for Studio Color 250 fixtures)
• IRIS - iris position value*
• SHUT - shutter strobe value
• DIM - shutter dim flag value
• MSPD - MSpeed time value
•MACR - Macro/LAD value
• CNTL - control channel value
*menu items only available for Studio Spot 250 fixtures
**menu items only available for Studio Color 250 fixtures
To view the DMX status and construct values:
1. Press and hold the <Menu> button until “ADDR” appears on the LED
display.
2. Using the <Up> and <Down> arrow buttons, scroll to the “INFO” menu
and press the <Enter> button to select the “INFO” menu.
3. Using the <Up> and <Down> arrow buttons, scroll to the “DMX” menu
and press the <Enter> button to select the “DMX” menu.
4. Using the <Up> and <Down> arrow buttons, scroll to the “FIXT” menu
and press the <Enter> button to select the “FIXT” menu.
5. Using the <Up> and <Down> arrow buttons, scroll to the desired DMX
status or construct (listed above) and press the <Enter> button to select
the desired option. The LED will display the selected DMX status or
construct value.
If you are having a particular problem with the fixture, follow the steps above to select
a construct and view its value. After noting the value of the construct you selected,
use your controller to change that construct’s value.