Datasheet

3. Details of Carrier Tape
4. Adhesion Test
Reasonable pulling strength: 0.1~0.7N
Pulling speed: 300mm / min
b. Seal tape shall not cover on the feeding holes more than 0.75 mm.
(1)
a. Last reeling empty part of carrier tape shall be more than 10 cm.
b. Leader part of seal tape shall be more than 20 cm
.
c. First reeling Empty part of carrier tape shall be mo re than 10 cm.
d. Adhesive tape fixing the end of the leader part shall be approx 10 cm.
(2) Deviation between carrier tape and seal tape
a. Deviation between carrier tape and seal tape shall be less than 0.5 mm.