Datasheet

YAGEO CORPORATION ALUMINUM ELECTROLYTIC CAPACITORS
Miniature Size Aluminum
Electrolytic Capacitors
SZ
105qC Single-Ended Lead Aluminum Electrolytic Capacitors For High Frequency Applications
DESCRIPTION
Used in switching regulator applications in
computers. Especially for high frequency.
Low impedance and E.S.R., high permissible
ripple current at high frequency and higher
operating temperature (-40ºC to +105ºC).
High Temperature Load Life at 105ºC for
2000 Hours
ELECTRICAL CHARACTERISTICS
Operating Temperature : -40º ~ +105ºC
Working Voltage : 6.3 ~ 16V
Rate Capacitance Range : 470 ~ 3300PF
Capacitance Tolerance : -20 ~ +20%
DC Leakage Current (PA) : I = 0.03 CV Whichever is greater.
( Measurements shall be Made After a 2 Minute Charge at Rated Working Voltage )
Dissipation Factor : at 120 Hz, 25ºC
WV (V) : 6.3 10 16
D.F (%) : 22 19 16
For capacitor whose capacitance exceeds 1000PF. The value of D.F(%) is increased by 2% for every
addition of 1000PF.
WV (V) : Rated Voltage (V) 6.3 10 16
Impedance : Z - 25qC / Z + 20qC222
Impedance : Z - 40qC / Z + 20qC333
Load Life : 2000 Hours at 105ºC Assured with Full Rated Maximum Ripple Current Applied
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : Not Exceed 200% of Initial Requirement
(c) Leakage Current : Not Exceed the Initial Requirement
Shelf Life : 1000 Hours, No Voltage Applied, at 105ºC
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : Not Exceed 200 % of Initial Requirement
(c) Leakage Current : Not Exceed 200% of Initial Requirement
[ Ultra Low ESR ]
DIAGRAM OF DIMENSIONS
Dø F dø
4.0 1.5 0.45
5.0 2.0 0.5
6.0 2.5
8.0 3.5
10.0 5.0 0.6
12.0
13.0
16.0 7.5 0.8
18.0
22.0 10.0 0.8
Dimensions : mm
Rubber End Seal
Vinyl Sleeve
(P.V.C)
L 15Min.
Dr0.5
Fr0.5
5Min.
L 15Min.
0.4Max.
Dr0.5
Fr0.5
Rubber End Seal
Vinyl Sleeve
(P.V.C)
5Min.
Rubber Stand-off
Frequency(Hz) 120 1K 10K 100K d
Factor 0.50 0.80 0.90 1.00
Frequency coefficient
Temperature(qC) 65 85 105
Factor 2.10 1.70 1.00
Temperature coefficient
L d12 L + 1.5Max.
13d L d 15 L
L t16 L + 2.0Max.
+1.0
-0.5