Datasheet

YAGEO CORPORATION ALUMINUM ELECTROLYTIC CAPACITORS
Unit : mm
Vinyl Sleeve
Botton Plate
Negative
L+2 Max. 5.8r1
Dr1
10r0.5
Safety Device
2m/m x 2
1.5
0.910r0.5
5.8r1.0
3.0
0.8
DIAGRAM OF DIMENSIONS
Location of P.C.B. Holes
Miniature Size Aluminum
Electrolytic Capacitors
LH [For 85ºC, 2000 Hours Miniature ]
For Printed Circuit Board High-Performance Aluminum Electrolytic Power
Supply Input and Output Filter Capacitors
ELECTRICAL CHARACTERISTICS
Operating Temperature Range -40 to+85ºC -25 to+85ºC
Rated Voltage Range 6.3 to 100VDC 160 to 450VDC
Capacitance Tolerance r20% (at 25ºC,120Hz)
Leakage Current I = 0.02CV or 3mA Whichever is smaller. (At 25ºC, After 5 Minutes Application of
DC Working Voltage at 25qC)
Where, I; Leakage Current (PA) C: Nominal Capacitance (PF) V; Rated Voltage (V)
Dissipation Factor Rate Voltage (V) 6.3 10 16 25 35 50~80 100 160~250 315~450
D.F (%) 605040252520 15 10 * 15
Note: * (15%) For Case Size D = 35m/m or L = 20m/m (At 120Hz, 25ºC)
(W V = 6.3 ~ 100V For Capacitor Whose Capacitance Exceeds 1000PF
The value of D.F(%) is increased by 2% for every addition of 1000PF.
Rated Voltage(v) 6.3~16 25 35 50~63 80~100 160~400 450
Z(-25ºC) / Z(20ºC) 3 3 3 2 2 4 8
Z(-40ºC) / Z(20ºC) 12 10 8 6 5 – –
Load Life After the capacitors are subjected to DC with the full rated ripple current applied at
85ºC for 2000 hours. The following specifications shall be satisfied when the
capacitors are restored to 25ºC the sum of DC voltage and peak AC voltage must
not exceed their full rated voltage.
Capacitance Change dr20% of the Inital Value
D.F (tanw) d 200% of the Initial Specified Value
Leakage Current d the Initial Specified Value
Shelf Life The following specifications shall be satisfied when the capacitor are restored to 25ºC
after exposing them for 1000 hours at 85ºC without voltage applied.
Capacitance Change dr20% of the Inital Value
D.F (%) d 150% of the Intial Specitied Value
Leakage Current d 150% of the Initial Speciffied Value
DESCRIPTION
LH type capacitiors, size are combined with
snap-lock terminals for easy to mount on P.C.
Board.
They are ideally suitable to be used in
switching.
Power Supplies and Orther Industrial or
Commercial Applications
Temperature(qC) 60 70 85
Factor 1.42 1.30 1.00
Temperature coefficient
Frequency(Hz) 50 60 120 1K 10K~00K
6.3~100V 0.88 0.90 1.00 1.15 1.16
160~250V 0.75 0.78 1.00 1.16 1.23
350~450V 0.74 0.76 1.00 1.10 1.15
Frequency coefficient
Multiplier for Ripple Current