Datasheet

YAGEO CORPORATION ELECTROLYTIC CAPACITORS
Miniature Aluminum
Electrolytic Capacitors
SE-K [ For General ]
105°C Single-Ended Lead Aluminum Electrolytic Capacitors Rated Voltage up to 450V
ELECTRICAL CHARACTERISTICS
Operating Temperature Range : -40 ~ +105°C / -40 ~ +105°C / 25 ~ +105°C
Rated Voltage Range : 6.3 ~ 100V / 160 ~ 250V / 350 ~ 450V
Rated Capacitance Range : 0.47 ~ 15000µF / 0.47 ~ 470µF / 0.47 ~ 150µF
Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C
Leakage Current (µA) : I = 0.01CV (µA) + 3µA / 0.03CV (µA) + 10µA Whichever is greater.
(After Rated Voltage Applied for 2 Minutes)
Dissipation Factor
W V (V) : 6.3 10 16 25 35 50 63~100 160 ~ 250 350 ~ 450
D.F. (%) : 26 22 18 16 14 12 10 15 20
Endurance : After applying rated voltage for 1000 hours at 105°C. The capacitors shall meet the
following requirements.
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : 200% or Less of Initial Specified Value
(c) Leakage Current : Initial Specied Value or Less
Shelf Life : After leaving capacitors under no load at 105°C for 500 hours, the capacitors shall meet
the same requirement as Endurance.
DESCRIPTIOn
Lower-cost capacitors expressly intended for high
density printed circuit board.
Very High Volumetric Efciency.
Ideally suited for general-purpose applications, coupling,
decoupling, by pass, and ltering circuit in entertainment
electronics.
Feature High CV Product with Moderate Cost.
muLTIPLIER FOR RIPPLE CuRREnT
Frequency Coefcient
FREQuEnCY (Hz) 120 300 1K 10K~100K
6.3~100V Below~68µF 1.00 1.20 1.30 1.45
6.3~100V 100~680µF 1.00 1.10 1.15 1.25
6.3~110V 1000~22000µF 1.00 1.05 1.10 1.15
160~450V ALL Cap(µF) 1.00 1.05 1.10 1.50
Rubber End Seal
L 15Min.
D ± 0.5
F
±
0.5
5Min.
Vinyl Sleeve
(P.V.C)
L 15Min.
0.4Max.
D ± 0.5
F
±
0.5
Rubber End Seal
5Min.
Vinyl Sleeve
(P.V.C)
Rubber Stand-off
Dø F dø
5.0 2.0 0.5
6.3 2.5
8.0 3.5 0.6
10.0 5.0
12.0
13.0
16.0 7.5 0.8
18.0
22.0 10.0 0.8 (1.0)
L
≤
16 L + 1.5Max.
l
>
16 L + 2Max.
Dø = 8 & 10 L + 2.5Max.
Dø
<
20 Dø + 0.5
Dø
≥
20 Dø + 1
DIAGRAm OF DImEnSIOnS
Dimensions: mm