Car Top Display User Manual Copyright © 2021 Yaham Optoelectronic Co.
Yaham Optoelectronic Co., Ltd FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Yaham Optoelectronic Co., Ltd 1. Product Specification Dimension: 986mm(W) x 390mm(H) x 98mm(T) Color Choice: Silver, golden Pixel: 384x128x2@P2.5 Weight: 13.
Yaham Optoelectronic Co., Ltd 2. Installation Guide Connection diagram of the display Step 1. Connect the positive, negative and ACC wires from your car battery to the display Step 2.
Yaham Optoelectronic Co., Ltd 3. How to Use the Display 3.1 Create your own account: Step 1. Visit our AIPS platform at https://www.ledaips.com Register an account by clicking Join in below picture or you may use our test account below for a brief visit. Admin Account: dreamTaxiTest Admin Password: dreamTaxiTest Step 2. After logging in, you will see the functions shown in below picture of which we will walk you through some major functions so as to get yourself acquainted with the system.
Yaham Optoelectronic Co., Ltd 3.2 Play media on your display Step 1. Upload your media files by following the menu path: Media‐> Upload media file(s) Wait till the file(s) finishes Step 2. Create a program by following the menu path: Programs ‐> Add simple program In the popup window, set display pixel sizes at 384 for Width and 128 for Height.
Yaham Optoelectronic Co., Ltd Step 3. Choose the images and click + to add them to the program. On the right of the window, set a name for the program and click Save. Step 4.
Yaham Optoelectronic Co.
Yaham Optoelectronic Co., Ltd Step 5.
Yaham Optoelectronic Co., Ltd 3.3 Send task based on GPS Step 1. Choose the map. Step 2. Add GPS play point by clicking the location on the map. Set Name of GPS Task Name. Choose the media, input Name and radius. Step 3. Save the GPS task.
Yaham Optoelectronic Co., Ltd Step 4.
