Operation Manual

7
1.2 Setting Up Your Pocket PC for Use
You must perform the initial startup and charge the battery before starting to use
your Pocket PC.
Performing the Initial Startup
The battery switch should be set to the ON (down) position for normal
operation.
1. Make sure that your Pocket PC is turned off.
2. Pull out the stylus and use it to slide the
battery switch to the ON (down) position.
CAUTION: Always leave the battery switch in the
ON position during normal operation.
3. The red notification indicator on your
Pocket PC will flash for approximately 30
seconds. Then your Pocket PC will
automatically turn on and display the
Welcome screen.
4. To begin the Welcome Wizard, tap the screen with the stylus and follow the
onscreen instructions to complete the Welcome Wizard. The wizard
presents a brief orientation to Microsoft® Windows® for Pocket PC, helps
you align the touch screen and prompts you to select your city and time
zone.