Operation Manual

80
Receiving Information
1. Align the IR ports so that they are unobstructed and within a close range.
2. Tap

Programs

Infrared Receive
icon.
3. Have the owner of the other device send the information to you. Your
Pocket PC automatically receives it.
6.4 Connecting to Your ISP
You can connect to your ISP (Internet Service Provider) and use the connection
to send and receive e-mail messages and view Web or WAP pages. First you
need to configure a modem connection to your ISP.
Configuring a Modem Connection to Your ISP
1. Install an optional IR modem.
2. Obtain the following information from your ISP: ISP dial-up access
telephone number, user name, password and TCP/IP settings. Some ISPs
require information in front of the user name, such as MSN/username.
3. Tap

Settings

Connections
tab 
Connections
icon.
4. Under The Internet settings, select
Internet Settings
and tap
Modify
.
5. In the
Modem
tab, select
New
.
6. Enter a name for the connection, such as “ISP Connection.”
7. In the
Select a modem
list, select your modem type.
8. You should not need to change any settings in
Advanced
. Most ISPs now use
a dynamically-assigned address. If the ISP you are connecting to does not
use a dynamically-assigned address, tap
Advanced

TCP/IP
tab, select
Use
specific IP address
and enter the address. When finished, tap
OK
and tap
Next
.
9. Enter the access phone number and tap
Next
.
10. Select other desired options and tap
Finish

OK
.
11. After setting up, you can start the connection by using a specific program.
(See section 6.6.)