Operation Manual

Page Index
- 10 -
USB connection
You can transmit files through the USB port of your PC.
1. Make sure your PC support USB devices and you have
installed the driver (Windows 98/98SE).
2. Turn off your Hypersound 156 if it is on.
3. Remove the USB port cap of your Hypersound 156.
4. Connect your PC directly or by supplied USB extension
cable with the Hypersound 156.
5. The LED lights red. It indicates that the Hypersound 156
is in USB mode.
6. The PC will automatically find the device when the
Hypersound 156 is connected to the PC for the first time.
The PC sets up the USB driver for the Hypersound 156.
7. When the USB driver installation is finished, “Yakumo
HS156 MP3 Hypersound 156” will appear in [System
Properties] >[Device Manager] as shown in the picture
below.
8. A removable disk icon is displayed in the "My Computer"
window.
How to check USB driver:
Windows 98, ME:
Control Panel -> System -> Device Manager
Windows 2000, XP:
Control Panel -> System -> Hardware -> Device Manager
Sending and deleting files by drag and drop
The removable disk icon displayed within the "My Computer"
window indicates the memory of the Hypersound 156.
You can now save, copy and delete files on the Hypersound 156
by Drag and Drop to the removable disk.
Click OK
Click Stop