Operation Manual

Page Index
- 11 -
Caution:
Do not unplug the Hypersound 156 while a file is being
downloaded. It will corrupt the firmware of the Hypersound
156.
If the Hypersound 156 does not work, take out the battery
and reinsert it after a few seconds.
The Hypersound 156 can be damaged when you take unplug the
Hypersound 156 during file transmission!
While you are downloading files, the LED is flashing. When the
transfer is finished, the LED light stops and you can unplug
the Hypersound 156 safely.
Unplugging the Hypersound 156
Windows 98 / 98SE
While USB port is busy, the LED is flashing. When the transfer
is finished, the LED light stops and you can take out the
Hypersound 156 safely.
Windows XP
Windows XP allows you to disconnect this device without using
the Safe Removal icon. So you can take out the Hypersound
156 safely when the LED light stops flashing.
Windows ME / 2000
While USB port is busy, the LED is flashing. When the transfer is
finished, the LED light stops. Follow the below pictures to stop
this USB Mass Storage Device using the Safe Removal icon.
Afterwards, you can unplug the Hypersound 156 safely.
Double Click the icon
Click OK