Installation Manual

P/N - - Rev EYRL PBINSTL FUL

Registration

required*

Wrong Code Entry Limit

5 Times

One Touch Locking

Enabled

Inside Indicator Light

Disabled (Off)

Factory Settings

Resetting Lock to Factory Default

Settings

Factory Setting

Master CodePIN

Automatic Re-lock

Disabled

Audio Mode

Enabled

Automatic Re-lock Time

30 Seconds

Shutdown Time 60 Seconds

*The Master code must be registered prior to any other programming of the lock.PIN

Privacy Button Setting

Disabled

Lockout Mode

Disabled

Interior Escutcheon

Reset

Button

When lock is reset to factory defaults all user codes

(including the Master code*) are deleted and allPIN

programming features are reset to original default

settings (see below).

1. Remove the battery cover and batteries.

2. Remove the interior escutcheon to access the

reset button.

3. The reset button (see image at right) is located

beside the cable connector.PCB

4. While pressing the reset button (minimum of 3

seconds) reinstall batteries. Release reset button.

5. Replace battery cover.

Upon reset, Master Code creation is the onlyPIN

option available and must be performed prior to any

other programming of the lock.