YDR2108 User Manual Keep this manual safe for future reference ※The functions and design of this product can be changed without notice for quality improvement.
Please read the followings before using your Yale GATEMAN product ·This product is designed and manufactured to assure personal safety. Improper use can result in personal damage or property loss. Please observe the procedures for installation, use and servicing. ·Yale GATEMAN is a precision electronic device. All safety and operating instructions should be read before the product is operated. ·Refer all servicing to qualified service personnel.
IMPORTANT SAFETY INSTRUCTIONS Please read the following safety instructions to prevent any accident, property damage and inconvenience. Children should be well educated for the operating instruction. Keep this manual in a convenient place so that you can refer to it when necessary. must be followed to protect yourself and your property. explains product functions and features. prohibited Yale GATEMAN digital door lock is a precision electronic device. must observe Clean only with dry cloth.
Caution Do not use an inappropriate tool that can cause damage or malfunction of the product. Handle the unit with care. Excessive force, careless handling may cause product damage. Be careful not to have unauthorized user know of your security code. Change your code periodically. Do not use water and any type of solvent such as gasoline or benzene as they can cause damage to electronic circuit, deterioration and or paint peel-off. Do not have your card key lost or stolen.
Overview ■ Floating ID technology ■ ■ Dual access ■ Easy re-registration of keys ■ ■ Easy and simple operation ■ Automatic locking Just closing the door will automatically lock the door. Manual operation is also available. ■ Break-in/Damage alarm 80dB alarm will go off if anyone attempts to damage the lock or forces the door open. Volume control You can change the operating volume without disturbing others. The break-in alarm still operates even if the silent mode is on.
Basic Operation 1. iButton Key Registration 5. Locking / Unlocking the Door from the inside Press [open / close] Button Press button Contact all the keys you wish to register on one by one Press button 6. Automatic / Manual Lock Mode ① Automatic Lock Mode : 2.
CONTENTS Specifications 08 Option Identification of Product 09 1. Remote control Module 2. Remote control How to use 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
Specifications Parts Specifications Remarks Front Body 19(D)×64.6(W)×160.2(H) Die cast zinc Back Body 36(D)×85(W)×158(H) Glass fiber enforced plastic iButton Key 4 EA Up to 20 keys registration (sold separately) 4EA 1.5V AA alkaline batteries(Operating voltage: 4.
Identification of Product 1.
2. Back body (Back Body, install on the inside of the door) Auto / Manual Lock button 4EA 1.
How to use 1. Registering Card Keys ▣ Keep the door open while you register a new code to prevent yourself from accidentally being locked out. 4 ▣ Additional Maximum 4 ibutton keys are provided at purchase and you can register up to 20 card keys. ▣ Contact your local dealer for additional card keys. How to use ▣ Basic Key If you lose your currently using key, re-register all the remaining keys to invalidate the lost key.
Press [Registration] button Contact all the keys you wish to register on the [card key reader] one by one Press [Registration] button Check the key operation Pik Pi-bing If it takes too long (over 7 seconds) to enter the code after pressing [Registration]button, the code will not be registered. 12 Pi-bi-bing If you hear a “pik” The registration is Opening the door with Sound, the card keys complete with a “pi-bi- your card key. are registered. If you bing” sound.
2. Registering Security Code ▣ Keep the door open while you register the security code to prevent yourself from accidentally getting locked out. (4digits) ▣ The old code is automatically deleted when registering a new code. ▣ If incorrect codes are entered 5 times in a row all functions shut down for about 3 minutes. Use manual thumbturn or just wait 3 minutes to resume the operation.
Ex) Changing your code to 3, 5, 4, 6 Press [Registration] button Enter your security code Press [Registration] button Check your security code Press button Pi-bing Open [Battery Cover] and Press [Registration] button. If it takes too long (over 7 seconds) to enter the code after pressing [register security code] button, the code will not be registered. 14 Pi-bing [Registration] Pi-bi-bing Enter the code you wish to register. (4~12 digits) < *> and <#> buttons can not be used for security codes.
3. Locking the Door from the Outside Automatic lock mode The automatic lock sensor detects the door closing and locks the door automatically within 5 seconds. Within 5 seconds Di-di-ding The door locks when touch the keypad with the palm Di-di-ding How to use Manual lock mode As the automatic lock function does not work in manual lock mode, make sure to check that the door is securely locked when leaving the premises.
4. Unlocking the Door from the Outside Unlocking the door with iButton key Contact the iButton key on the reader Confirming the door open It is unlocked with a “pi-bi-bing” sound. Pi-bi-bing Security code (Normal) Touch the keypad with the palm Enter your security code Touch the keypad again or press [ ] button or * The keypad cannot be operable when in case of wearing the glove. * Using the palm or pressing button do the same function after entering the security code.
Security Code (Exposure -proof) Touch the keypad with the palm Press Enter the security code two times in a row Touch the keypad again or press button Confirming the door open 2 times Pi-bi-bing How to use or * Exposure-proof function is useful when there is danger of exposing the security code. * All the numbers on the keypad are blinking with every touch when exposure-proof function is in operation.
5. Locking the Door from the Inside Automatic lock mode When set on automatic lock mode. The automatic lock sensor detects the door closing and locks the door automatically within 5 seconds. Within 5 seconds Di-di-ding Use [manual knob] on the back body.
6.
7. Setting it on Manual Lock Mode Alarm In the default setting, manual lock mode doesn't ring off the alarm while using the door. However, the users can change it for their own need.
8. Automatic/Manual Lock Mode This product has a sensor which detect the door closing and automatically locks the door in 5 seconds. Setting it on automatic lock mode Push up the Button Setting it on manual lock mode Push down the Button on Manual Mode Automatic Mode Automatic Mode Manual Mode How to use on Mode. Mode.
9. External Forced Lock In external forced lock mode, the door cannot be unlocked from the inside. It is useful to prevent a break-in in case of long absence of the users from the premises.
Setting external forced lock mode on with The security code Touch the keypad with the palm Enter the security code Press and hold button Setting external forced lock mode off To unlock the door from the outside in external forced lock mode, use your iButton key or security code to unlock the door. Once the door unlocks, the system automatically switches the external forced lock mode off.
10. Internal Forced Lock The door cannot be unlocked from the outside even by the card key or security code in internal forced lock mode. It enhances the level of security when all users are inside of the premises. [Locked] UNLOCK [Unlocked] UNLOCK LOCK LOCK Locking switch ⊙ No iButton and keypad function from the outside in internal forced lock mode. It sounds the warning beeps when you touch the keypad or contact the iButton key.
11. Using Manual thumbturn in Emergency In case you cannot open the lock with [open/close] button. Turn [manual thumbturn] to open the lock. How to use (1) It triggers the alarm when you open the door after unlocking the lock with [manual thumbturn]. In order to turn off the alarm, (1) press [open/close] button for 5 seconds, or (2) contact the iButton key, or (3) enter the security code.
12. Break-in / Damage Alarm The alarm lasts up to 30 minutes or until a verification is made. Break-in alarm •If the lock is damaged or entry is forced while the door is locked, a 80dB alarm is triggered. •It sounds the alarm to open the lock with [manual thumbturn] while the door is closed. Damage alarm •If the lock is damaged on the outside the damage alarm is triggered.
Turning the alarm off (Choose one of the three options below.) Contact your iButton key ① Contact the card key on the [iButton key reader]. ① Touch the keypad with the palm ② Enter the security code Press [open/close] button Press and hold [open/close] button for 5 seconds.
13. Heat Alarm The lock triggers the alarm and automatically unlocks if it detects temperature as high as 60ºC(140ºF). The detection temperature can be different depending on the surroundings. [Locked] [Automatically unlocked] ⊙ The heat alarm can be turned off by removing batteries or entering the iButton key or the security code.
14. Wrong-try Lock-out No keypad functions during this wrong-try lock-out delay. The break-in and damage alarm work regardless of this function. •If incorrect security codes or unregistered iButton keys are attempted 5 times in a row, it will lock out for 3 minutes with the blinking LED. How to use 5 times •Resume the operation automatically after 3 minutes of lock-out, or by pressing [Open/Close] button on the back body.
15. Volume control This function can control the operating sounds so that the door can be opened and closed without disturbing others. ❶ Silent Mode Setting the volume Button on “ 0 ” ❷ Normal Mode Setting the volume Button on “ 1 ” ❸ Loud Mode Setting the volume Button on “ 2 ” * In the silent mode, the alarm still operates.
16. Battery & Replacement This product uses 4 1.5V alkaline AA batteries which can be used approximately one year on the condition of 10 times open/close cycles per day. 1.5V AA size alkaline battery 1 Year 1:1 actual size Replace all 4 batteries when a low battery warning melody rings and the LED turns red. The low battery LED turns on LED(Red) When low battery warning melody rings vary due to temperature, moisture, frequency of use and the quality of the batteries.
17. Displaying operation status (Independent lighting) ❶ Low battery ❹ External / Internal forced locking Starting from the left column, the LED comes on from left to right to left for twice. ❺ In case of emergency ❷ Jammed locking bolt The LED keeps coming on to the clockwise. ❸ Wrong-try lock-out delay for 3 minutes ❻ When registering a security code It shows what the user has just registered in order.
Option 1. Remote control Module Remote control module should be installed in advance to use remote control. Open [battery cover] and insert the module into the slot. Proper functioning of the module can be checked by operating a remote control .
2. Remote Control The remote control is an FM frequency (FSK) type that uses a Floating ID encoding system, which changes the wireless code each time you use It, so that there is no risk of hacking. It is non-directional and the operational range is up to 10~20m. The photo frame design brings you different atmospheres by putting in a photo and hanging the remote control on the wall. ※Caution! The operational range may vary depending on the installation environment.
Deleting the remote control registration Press [menu] button Press buttons , Press [menu] button Deleting remote control registration ing Di-ri-ri-ri-r Pi-bing Pik Pi-bing Remote control registration is cancelled with a “di-ri-riring” sound. Option In case you do not use remote control or lose it, deleting remote control registration may lengthen the battery life.
How to use the remote control Unlocking the door Press [open] button, and it will unlock within 2~3 seconds. 36 Locking the door Press [close] button, and it will lock within 2~3 seconds. Changing the batteries Open up the battery cover at the back of the remote control and change the batteries.
Cautions 1. Emergency power supply In case the batteries are completely discharged, 9V battery can be used to supply electricity to the unit. Unlock with the card key or security code while contacting a 9V battery just like the below instruction. Discharged batteries should be replaced right away.
2. Lost iButton key If you lose the iButton key, re-registering remaining keys is required to prevent other people from using the lost card key. Lost iButton key Re-registering iButton key Enter the security code in case you lose the iButton key or you are not carrying it. ※ It is a user’s liability to break the lock because the user did not register a security code. Lost iButton key 3.
Cautions
