Installation Manual

34
P/N - - - Rev AYRL EMICL PBINSTL FUL
Feature Programming Through Menu Mode
Using Master code*PIN
1. Enter 4-8 digit master code* followed by key.PIN
2. Enter digit corresponding to the function to be performed followed by the key.
*The Master code must be registered prior to any other programming of the lock.PIN
Note: After Master code is entered, lock will automatically hand itself. For best results,PIN
lock should be installed on door during this process. If this process was done and lock was
not installed on door
, review the Re-Handing instructions listed in Hardware Troubleshooting.
Audio Mode
N/A
All Code Lockout Mode
**Network Setting
Join the network
Enable
Enable
Disable
Exit the network
Disable
For quiet areas, select Disable (3)
in Audio Mode.
Continue
Complete
Continue
Complete
U
U
Privacy Button Setting
Enable
Disable
Handing the Lock
Preforms automatic
handing of the lock
Master Code SettingPIN
M
User Codes
Enter
Delete
Advanced Lock Settings
1~25: without network module or with iM1 network module
1~250: with Z-Wave Plus or ZigBee network module
**This function appears only with
network module installed.
Automatic Re-lock
Disable
30 sec
Inside Indicator Light
One Touch Locking
Enable
Disable
Enable
Disable
Default settings
in bold.
M
1
2
Continue
Complete
60 sec
3 min
2 min
***Set-up Digital Keys
1~12: with Bluetooth