Smart Cabinet Lock Installation Instructions Glow in the Dark Emergency Release 24/7 1-855-213-5841 support@yalelock.
1 Download the Yale Access App Create an account if you don’t already have one. If you already use the August App, use the same login. Select “Set up a Device” from the menu. Scan the QR code located on the battery door or on packaging. If you run into issues, tap "Can't Scan the Code?" and enter the serial number located on your packaging (starts with Q1). NOTE TO APPLE CUSTOMERS To control this HomeKit-enabled accessory, the latest version of iOS or iPadOS is recommended.
Attach 3M Tape to Mounting Bracket and Lock Post Clean surface before applying tape. After placement, wait 24 hours for adhesive to bond to max strength. If cabinet has a face frame or lip (max 1” high x max 1-1/4” deep), use long lock post.
5 Slide Lock Post Guide onto Lock Post 6 Attach Lock Post to Smart Lock 4 Trusted every day YRCB490-MNL-0014 Rev D Part of ASSA ABLOY
7 Install Smart Cabinet Lock Place template in desired mounting location as far from door hinges as possible. Mounting template cannot be used to position lock when using long lock post. Remove 3M film from mounting bracket.
8 Attach Lock Post to Door The lock has been tested to resist pulling forces up to 80 lbs.
Test Operation 9 Remove Lock Post Guide 7 Trusted every day YRCB490-MNL-0014 Rev D Part of ASSA ABLOY
O Set Up Yale Connect Wi-Fi Bridge optional If your lock came with a Yale Connect Wi-Fi Bridge (select models), the Yale Access App will walk you through set up. This must be plugged in within 10 feet of your Smart Cabinet Lock. Congratulations! You've completed the installation of your Yale® Smart Cabinet Lock. NOTE TO INSTALLER AND CONSUMER A second lock post is provided as a spare in the event the cabinet door must be forced open and installed lock post is broken.
O Screw Mounting optional x2 Make sure screws are no longer than thickness of your cabinet door. x2 Remove lock from mounting bracket to access screw holes.
O optional x2 or Double Door Plate Use screws OR double sided tape to adhere the double door plate when installing the Smart Cabinet Lock on the adjacent door of a double door cabinet.
O optional Long Lock Post The Long Lock Post is used on cabinets with a face frame or lip no taller than 1” and no deeper than 1-1/4”. Mounting template cannot be used to position lock when using long lock post.
Warning: Changes or modifications to this device, not expressly approved by Yale Home could void the user's authority to operate the equipment. FCC: Contain FCC ID: 2ABFG-YRIZW2USTS1 Model: YRCB-490-BLE-WSP This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.