rea1, Living· Yale Real Living• Push Button Deadbolt Installation and Programming Instructions (Yale) DID G) (ID @ @) ((ID (§) 0 (ID ® 0@@) Q) 0 Before you begin Q) )) DOWNLOAD THE BILT APP ® for 3D interactive instructions & to register your product ' -- ------------------------- --- x3 #8-32 X 5/16" Machine screws R.1 x4 Billo cw,;.;;; - #7 wood & #8-32 machine x 20mm Combination screws x2 M6x59.
["~~] Preparing Door (i) ✓
Installing Latch & Strike Plate 2-3/8 11 position ~ ~ I -- - i~-. ~ o.lo 0UP I •- - - -• I fr 1 II I II ~ I x4 [!!!] .....- I 2-3/4 11 position 0 optional 11111 Pull. Press Bolt must be in retracted (unlocked) position. Note ~ horizontal orientation of mechanism. A t, \ \ ' \ ~, \ ', ', 0 0
Installing Keypad Escutcheon Inside of Door Outside of Door ,.... ' .. .. ' .. .. .. .. .. .. .. Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism.
Installing Interior Mounting Plate Loosen screw to remove cover. 0 x2 .
Attaching the Cable Assembly
Installing Interior Escutcheon i x3
Ci) [✓] Testing Operation Lh Bolt must be in retracted (unlocked) position before installing AA batteries.
(i} [✓] Testing Operation
Installing Optional Radio Module Installing Batteries & Cover Tighten screw to replace cover. Congratulations, you've installed the Yale Real Living® Push Button Deadbolt! Turn sheet over for Programming Instructions to customize your product.
Programming Instructions Low Battery WarningFlashes RED Lock-out ModelKeypad Flashes ~_:-3-~.J:-~-- OJ @ (ID @)(ID@ (z)@)@ 0@@) liJ 0 Privacy Mode Button Exterior Escutcheon Interior Escutcheon Master PIN Code must be created before any further programming. Max User Codes = 250 with Network Module. Max User Codes = 25 without.
Creating Master PIN Code Press @) CID 3 @CID® CzJ ® CID 1 0@ ~ Press (I) Enter 4-8 digit Master PIN Code.
Creating User PIN Codes Master PIN code must be created first. *Max User Codes= 250 with Network Module. Max user codes= 25 without.
Unlocking Door with PIN Code Enter PIN Press 11 0 Unlock11 (Yale) CD®@ @)@(ID rzl®® @)@) Code Chart Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) UserType Master User User User User User User User User User User User User User User User - User Name User # PIN Code
Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master PIN code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2. Remove the interior escutcheon to access the reset button. 3. The reset button (see image at right) is located beside the PCB cable connector. 4. While pressing the reset button (minimum of 3 seconds) reinstall batteries. Release reset button. 5.
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the keypad flashes 8 times and the lock beeps 3 times as well. Audio Mode: Choosing Disable (3) in Audio mode shuts off the code confirmation tone play-back for use in quiet areas. Audio mode is enabled or disabled through feature programming by the Master code.
Feature Programming Through Menu Mode Using Master PIN code* 1. Enter the 4-8 digit Master PIN code followed by the@) key. 2. Enter digit corresponding to the function to be performed followed by the @) key. *The Master PIN code must be registered prior to any other programming of the lock. 0Ma+©a+0 • Master PIN Code Setting • -+ M GI c+:J User PIN Code Registration • ua B Individual Delete! ------"'- I+ a El a mAll DeleteI ~ One Touch Lockin N/A • Default settings in bold. ...
Programming Troubleshooting Symptom Suggested Action Lock does not respond door is open and accessible. • Press each keypad button for response when pressed. • Check batteries are installed and oriented correctly (polarity) in the battery case. • Check batteries are in good condition; replace batteries* if discharged. • Check to see if cable is fully connected and not pinched. Lock does not respond door is locked and inaccessible. • Batteries may be completely discharged.
Hardware Troubleshooting Cycle lock in both the locked and unlocked positions. If problems are found: Door is binding a. Check that door and frame are properly aligned and door is free swinging. b. Check hinges: They should not be loose or have excessive wear on knuckles. Bolt will not deadlock a. Check for sufficient clearance of the bolt within the strike-side jamb. Correct this by increasing the depth of the pocket for the bolt. b.
FCC: Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Yale· • For 1 3/4" [44.5mm] Thick Door 2-3/4" [70mm] Backset Yale Real Living™ Deadbolt El-0055-0K00-999 AYR-DOR-MKR Rev A 0') 1" [25mm] Dia. N E E 0 I.{) E E I.
Before you begin. Val~ Download the free BILT app for 3D. interactive installation tutorials. -t ... j ~ (_ -----':,[T,.. 0'-< ,,... Google Play Download installation manuals in other languages: YaleHome.com/Support Register your product and get 20%OFF~ Visit: YaleHome.com/Register Get 2O0/o0FF* at ShopYaleHome.
• ALERT I IMPORTANT Information on Product Returns Call us first! We're here to help. For any technical questions or support, please call 1-800-810-WIRE (9473) for Yale Technical Services. Support is available: M-F 8am to 7pm EST Email: Service@YaleLock.com ~ Download the free Bilt app for 3D interactive instructions GET IT ON ~ Google Play 9 Ap;s;~~~ ISL-1575-00 Rev.
