Owner's Manual

Definitions
All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it
restricts all user (except Master) PIN code access. When attempting to enter a code while
the unit is in Lockout, the keypad flashes 8 times and the lock beeps 3 times as well.
Audio Mode: Choosing Disable (3) in Audio mode shuts off the code confirmation tone
play-back for use in quiet areas. Audio mode is enabled or disabled through feature
programming by the Master code.
Automatic Re-lock Time: After a successful unlock , the unit will automatically re-lock after
thirty (30) seconds.
Low Battery: When battery power is low, the Status Indicator flashes RED. If battery power
is completely lost, use the key override.
Master PIN Code: The Master PIN code is used for programming and for feature settings. It
must be created prior to programming the lock. The Master code will also operate
(unlock/lock) the lock.
Network Setting: This setting is available thru the main Menu (7) and allows the lock to
connect with a network controller. It is also available through the wireless button on the
interior escutcheon.
One Touch Locking: When the latch is retracted, activating the keypad will extend the latch
(during Automatic Re-lock duration or when Automatic Re-lock is disabled).
Privacy Mode: Privacy mode is disabled by default. Enable Privacy mode by pressing the
privacy button for 4 seconds to put the lock in do-not-disturb mode (all pin codes are
disabled).
Shutdown Time: The unit will shut down (flashing keypad) for sixty (60) seconds and not
allow operation after the wrong code entry limit has been met.
Tamper Alert: Audible alarm sounds if attempting to forcibly remove outside lock from door.
User PIN Code: The User code operates the lock. Maximum number of user codes is 250
with Network Module ; without Network Module, maximum is 25 user codes.
Wrong Code Entry Limit: After five (5) unsuccessful attempts at entering a valid PIN code,
the unit will shut down and not allow operation.