User Manual

132 Scene Memories
02R Users Guide
Character Set
A scene memory name can be up to 16 characters long and can contain any
of the following characters:
Icons
INSERT—This icon is used to insert blank characters into the title edit
box at the current cursor location. Select the icon with the CURSOR
buttons and press the [ENTER] button.
DELETE—This icon is used to delete characters from the title edit box
at the current cursor location. Select the icon with the CURSOR buttons
and press the [ENTER] button.
COPY—This icon is used to copy the name of another scene memory.
Select the icon with the CURSOR buttons. Use the encoder wheel to
select a scene memory and press the [ENTER] button. The scene
memory name is copied into an edit buffer.
PASTE—This icon is used to paste a scene memory name previously
selected with the COPY operation into the title edit box. Select the icon
with the CURSOR buttons and press the [ENTER] button. The scene
memory name is pasted from the edit buffer into the title edit box,
replacing any text that was there. You can then edit the text to create a
unique scene memory name.
CLEAR—This icon is used to clear the contents of a scene memory. Use
the CURSOR buttons to select the icon. Use the encoder wheel to select
a scene memory and press the [ENTER] button. The 02R displays a
confirmation dialog box asking if you want to clear the scene memory.
The box has two icons: “CANCEL” and “EXECUTE”.
CANCEL is the default. To cancel the CLEAR operation, either press
the [ENTER] button or wait about 10 seconds—the CLEAR operation
will be automatically cancelled.
To clear the scene memory, use the CURSOR buttons to select the
“EXECUTE” icon and press the [ENTER] button. The scene memory is
cleared.
! #$%&'()*+,-./
0123456789: ;<=>?
@ABCDEFGH I JKLMNO
PQRSTUVWXYZ[\]^_
`abcdefghi jklmno
pqr s t uvwxyz { | }~
Note: You can customize your 02R to prevent the confirmation dialog box
appearing during the CLEAR operation. See “Preferences” on page 198 of
the Users Guide for more information.