User Manual

Scene Memories 135
02R User’s Guide
Fader Recall Safe
The 02R has two methods of protecting the system from sudden volume
level changes when a scene memory is recalled. You can select individual
channels to safety. When the scene memory is recalled, the fader level will
not change from the level it was set to in the previous mix.
Shown below is the SCENE 2/5 page—Fader Recall Safe.
The “Enable/Disable” controls are in the top left corner of the page. Use the
CURSOR buttons to select ENABLE check box and press the [ENTER]
button.
The remainder of the screen contains icons for each of the input and return
channels plus the stereo master fader. Select an icon and press the [ENTER]
button to safety a channel.
In order for the “Fader Recall Safe” function to have any effect, you must
store the scene memory (see “Storing Mix Scenes” on page 130 of the User’s
Guide).
Restoring the Faders
To restore the fader movements, select the “DISABLE” option and press the
[ENTER] button. Reset the fader levels. Then store the scene memory again
(see “Storing Mix Scenes” on page 130 of the User’s Guide).
Note: If you DISABLE the fader recall safe or switch off the individual channels
and then store the scene memory, be aware that the current fader levels will be
stored in the memory, not the levels that were previously stored there.
1. Use the [SCENE
MEMORY] button to
locate the SCENE 2/5
page.
2. Use the CURSOR buttons
to select the
“Enable/Disable”
options and use the
[ENTER] button to
ENABLE the safe
function.
3. Select the individual
channels with the [SEL]
buttons or the CURSOR
buttons. Press the [ENTER]
button to enable a
channel. Its icon is
highlighted.
4. Press the [STORE] button.
Respond to the
confirmation dialog box
by selecting “EXECUTE”
and pressing the [ENTER]
button. The scene
memory is stored.
SCENE
MEMORY