User Manual
PLAY-EFFECT
A5000/A4000 • Chapter 4 PLAY Mode 103
Knob 4
[ Turn] Effect1 — 3 Connect
Select the interconnection between the three effects
blocks.
[Range] 1/2/3, 1→2/3, 1→2→3, 1/2→3, 1→2←3
• 1/2/3..............No interconnection — all effects blocks operate inde-
pendently.
• 1 → 2/3.........Feeds the Effect-1 block through the Effect-2 block.
Specifically, output from the Effect-1 block passes
through the Effect-2 block and then to the stereo out-
puts.
• 1
→ 2 → 3....Feeds the Effect-1 block to the Effect-2 block, and the
Effect-2 block to the Effect-3 block.
• 1/2
→ 3.........Effect 1 functions independently, while the output of
Effect 2 is connected to Effect 3.
• 1 → 2 ← 3....Feeds the Effect-1 block to the Effect-2 block, and the
Effect-3 block to the Effect-2 block.
[ Press] Effect2 BYPASS
The Effect2 effect type display will appear as "(Bypass)"
and Effect2 will be temporarily bypassed (no effect).
Press a second time to to re-engage the effect.
Knob 5
[ Turn] Effect4 — 6 Connect
Select the interconnection between the three effects
blocks.
This function is not available on the A4000.
[Range] 4/5/6, 4→5/6, 4→5→6, 4/5→6, 4→5←6
• 4/5/6............. No interconnection — all effects blocks operate inde-
pendently.
• 4 → 5/6........ Feeds the Effect-4 block through the Effect-5 block.
Specifically, output from the Effect-1 block passes
through the Effect-5 block and then to the stereo out-
puts.
• 4
→ 5 → 6 ... Feeds the Effect-4 block to the Effect-5 block, and the
Effect-5 block to the Effect-6 block.
• 4/5
→ 6........ Effect 4 functions independently, while the output of
Effect 5 is connected to Effect 6.
• 4 → 5 ← 6 ... Feeds the Effect-4 block to the Effect-5 block, and the
Effect-6 block to the Effect-5 block.
[ Press] Effect3 BYPASS
The Effect3 effect type display will appear as "(Bypass)"
and Effect3 will be temporarily bypassed (no effect).
Press a second time to to re-engage the effect.