User Manual

PLAY-CONTROL
                                                      A5000/A4000 • Chapter 4 PLAY Mode 113
Pr ogr am LFO
[PLAY] Button [F6] Button Knob 1 to select
"PLAY-PgmLFO"
Sets up the Program LFO.
The Program LFO can be synchronized to a MIDI clock sig-
nal from an external MIDI device to control programs and
samples. Use MIDI clock synchronization and the StepWave
LFO waveform, perfectly synchronized note-length control
becomes possible.
In order to use the Program LFO to control programs and /or sam-
ples, the program and/or sample controller parameter must be set
to "Program LFO."
The Program LFO will not function while the internal sequencer is
running.
Knob 1
[ Turn] Cursor/Page
Positions the cursor to select a controller, and selects dis-
play pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 2
[ Turn] Program LFO Wave
Specifies the waveform of the program LFO.
[Range] off, Sine, Saw, Triangle, Square, S/H, StepWave
off ... The Program LFO will not function.
Sine
Saw
Triangle
Square
S/H (Sample and Hold) ... Random variation is produced.
StepWave ... The wave created by using the Cursor e parameter on this
page is used.
Knob 3
[ Turn] Program LFO Sync
Determines whether or not the LFO speed will be syn-
chronized to an external MIDI controller.
[Range] Manual, MIDI-A,
MIDI-B (Manual, MIDI on the A4000)
Manual ... The speed specified by the Progral LFO
Tempo parameter is used.
MIDI-A ... The LFO speed is synchronized to a
MIDI clock signal received via the MIDI IN-A
connector.
MIDI-B ... The LFO speed is synchronized to a
MIDI clock signal received via the MIDI IN-B
connector.
When Program LFO Sync is set to MIDI-A or MIDI-B
(MIDI on the A4000), the Program LFO Tempo, Pro-
gram LFO Phase Reset Channel, and Program LFO
Phase Reset Note parameters will appear as "---" on
the display and cannot be edited.
Cursor q
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page
Program LFO
Wave
Program LFO
Sync
Program LFO
Tempo
Program LFO
Cycle
Press
action
Tree View QUICK...
q
Cursor
Modulation
Time
Modulation
Time
Modulation
Time
Modulation
Time
Modulation
Time